home *** CD-ROM | disk | FTP | other *** search
- DITL_201.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=100 y1=55 x2=170 y2=75
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=265 y2=45
- # text: "Sorry, Extractor requires System version 6.0 or newer."
-
-
- DITL_202.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=100 y1=55 x2=170 y2=75
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=260 y2=45
- # text: "Sorry, Extractor requires a Macintosh Plus or newer."
-
-
- DITL_203.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=100 y1=130 x2=170 y2=150
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=260 y2=43
- # text: "Sorry, an unrecoverable error has occurred."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=56 x2=260 y2=120
- # text: "A required resource cannot be loaded (^0). There may not be sufficient memory available or the Extractor application may be damaged."
-
-
- DITL_204.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=95 y1=100 x2=165 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=245 y2=90
- # text: "Sorry, an unrecoverable error has occurred.\n\nAn internal inconsistency has been detected (^0)."
-
-
- DITL_205.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=109 y1=70 x2=179 y2=90
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=245 y2=60
- # text: "Sorry, there is not enough memory available to run Extractor."
-
-
- DITL_206.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=100 y1=70 x2=170 y2=90
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=265 y2=60
- # text: "Sorry, there is not enough memory available to perform that operation."
-
-
- DITL_207.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=110 y1=100 x2=180 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=280 y2=90
- # text: "Memory is critically low.\n\nPlease close some windows or take some other action which will free up additional memory."
-
-
- DITL_214.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=95 y1=100 x2=165 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=250 y2=90
- # text: "This is not the requested segment file.\n\nThis file is segment #^0 of ^1 archive."
-
-
- DITL_240.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=106 y1=100 x2=176 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=287 y2=44
- # text: "You can\'t extract a folder to a non-HFS volume."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=56 x2=290 y2=89
- # text: "The files in the folder may be extracted by selecting them directly for extraction."
-
-
- DITL_241.txt
- # 5 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=110 x2=90 y2=130
- # text: "No"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=20 y1=140 x2=90 y2=160
- # text: "Yes"
- # item 2: BUTTON (0x04) enabled
- # bounds: x1=195 y1=140 x2=265 y2=160
- # text: "Cancel"
- # item 3: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=275 y2=60
- # text: "“^0” already exists."
- # item 4: TEXT (0x88) disabled
- # bounds: x1=10 y1=68 x2=275 y2=100
- # text: "Do you wish to overwrite it with the file/folder extracted from the archive?"
-
-
- DITL_242.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=120 x2=90 y2=140
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=195 y1=120 x2=265 y2=140
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=275 y2=110
- # text: "“^0” could not be extracted properly.\n\nThe archive is damaged."
-
-
- DITL_243.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=120 y1=125 x2=190 y2=145
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=305 y2=60
- # text: "Sorry, can\'t extract “^0”."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=67 x2=305 y2=115
- # text: "A non-empty FOLDER with that name already exists (you can\'t overwrite a folder with a file unless the folder is empty)."
-
-
- DITL_244.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=85 x2=90 y2=105
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=265 y1=85 x2=335 y2=105
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=345 y2=75
- # text: "“^0” is an encrypted file.\n\nExtractor cannot extract encrypted files.\n"
-
-
- DITL_250.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=110 y1=70 x2=180 y2=90
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=280 y2=60
- # text: "“^0” is locked and cannot be modified."
-
-
- DITL_251.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=105 y1=70 x2=175 y2=90
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=275 y2=60
- # text: "“^0” is busy with another application."
-
-
- DITL_252.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=90 y1=55 x2=160 y2=75
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=240 y2=45
- # text: "A file error has occurred. Too many files are open."
-
-
- DITL_253.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=105 y1=85 x2=175 y2=105
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=275 y2=75
- # text: "A file error (^1) has occurred while accessing “^0”. "
-
-
- DITL_254.txt
- # 2 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=100 y1=100 x2=170 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=255 y2=90
- # text: "This volume is full.\n\n“^0” could not be written."
-
-
- DITL_255.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=110 y1=115 x2=180 y2=135
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=280 y2=63
- # text: "Cannot find “^0”."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=70 x2=280 y2=105
- # text: "It has probably been moved, renamed or deleted since it was last referenced."
-
-
- DITL_256.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=105 y1=100 x2=175 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=270 y2=63
- # text: "Cannot find “^0”."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=70 x2=270 y2=90
- # text: "Its volume has been unmounted."
-
-
- DITL_260.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=105 y1=130 x2=175 y2=150
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=270 y2=63
- # text: "Cannot read “^0”."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=70 x2=270 y2=120
- # text: "It is either damaged or uses a format which this version of Extractor does not recognize."
-
-
- DITL_262.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=90 y1=115 x2=160 y2=135
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=240 y2=45
- # text: "This is segment #^0 of a multi-segment archive."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=56 x2=240 y2=105
- # text: "For archives with more than one segment, you must open the final segment file of the archive."
-
-
- DITL_263.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=95 y1=100 x2=165 y2=120
- # text: "OK"
- # item 1: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=260 y2=45
- # text: "Sorry, Extractor can\'t open this archive."
- # item 2: TEXT (0x88) disabled
- # bounds: x1=10 y1=56 x2=260 y2=90
- # text: "It contains ^0."
-
-
- DITL_270.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=70 x2=90 y2=90
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=200 y1=70 x2=270 y2=90
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=280 y2=60
- # text: "“^0” is locked and cannot be modified."
-
-
- DITL_271.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=70 x2=90 y2=90
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=195 y1=70 x2=265 y2=90
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=275 y2=60
- # text: "“^0” is busy with another application."
-
-
- DITL_272.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=55 x2=90 y2=75
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=160 y1=55 x2=230 y2=75
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=240 y2=45
- # text: "A file error has occurred. Too many files are open."
-
-
- DITL_273.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=85 x2=90 y2=105
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=190 y1=85 x2=260 y2=105
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=270 y2=75
- # text: "A file error (^1) has occurred while accessing “^0”. "
-
-
- DITL_274.txt
- # 3 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=100 x2=90 y2=120
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=175 y1=100 x2=245 y2=120
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=255 y2=90
- # text: "This volume is full.\n\n“^0” could not be written."
-
-
- DITL_275.txt
- # 4 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=115 x2=90 y2=135
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=190 y1=115 x2=260 y2=135
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=280 y2=63
- # text: "Cannot find “^0”."
- # item 3: TEXT (0x88) disabled
- # bounds: x1=10 y1=70 x2=280 y2=105
- # text: "It has probably been moved, renamed or deleted since it was last referenced."
-
-
- DITL_276.txt
- # 4 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=20 y1=100 x2=90 y2=120
- # text: "Continue"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=180 y1=100 x2=250 y2=120
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=70 y1=10 x2=270 y2=63
- # text: "Cannot find “^0”."
- # item 3: TEXT (0x88) disabled
- # bounds: x1=10 y1=70 x2=270 y2=90
- # text: "Its volume has been unmounted."
-
-
- DITL_300.txt
- # 9 entries
- # item 0: CUSTOM (0x00) enabled
- # bounds: x1=0 y1=0 x2=1000 y2=1000
- # data: ""
- # item 1: TEXT (0x88) disabled
- # bounds: x1=102 y1=10 x2=327 y2=60
- # text: " ^0\nCopyright © 1990 by Bill Goodman\n All Rights Reserved"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=52 y1=69 x2=378 y2=103
- # text: "Extractor is a free utility for extracting files from archives created by Compactor and StuffIt."
- # item 3: TEXT (0x88) disabled
- # bounds: x1=12 y1=133 x2=418 y2=150
- # text: "To Extract Files From An Archive:"
- # item 4: TEXT (0x88) disabled
- # bounds: x1=30 y1=153 x2=418 y2=170
- # text: "• Open the archive using the Open command."
- # item 5: TEXT (0x88) disabled
- # bounds: x1=30 y1=173 x2=418 y2=189
- # text: "• Double-click on a folder\'s name to view its contents."
- # item 6: TEXT (0x88) disabled
- # bounds: x1=30 y1=193 x2=418 y2=226
- # text: "• Select a file or folder by clicking on its name. Hold down\n the ⌘ or shift key to select multiple items."
- # item 7: TEXT (0x88) disabled
- # bounds: x1=30 y1=230 x2=418 y2=249
- # text: "• Use the Extract command to extract the selected items."
- # item 8: PICTURE (0xC0) disabled
- # bounds: x1=10 y1=111 x2=418 y2=122
- # PICT resource ID: 2000
-
-
- DITL_330.txt
- # 9 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=218 y1=150 x2=288 y2=168
- # text: "Extract"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=218 y1=176 x2=288 y2=194
- # text: "Cancel"
- # item 2: TEXT (0x88) disabled
- # bounds: x1=18 y1=222 x2=201 y2=238
- # text: ""
- # item 3: CUSTOM (0x80) disabled
- # bounds: x1=198 y1=47 x2=302 y2=67
- # data: ""
- # item 4: BUTTON (0x04) enabled
- # bounds: x1=218 y1=74 x2=288 y2=92
- # text: "Eject"
- # item 5: BUTTON (0x04) enabled
- # bounds: x1=218 y1=101 x2=288 y2=118
- # text: "Drive"
- # item 6: EDIT_TEXT (0x10) enabled
- # bounds: x1=20 y1=242 x2=197 y2=258
- # text: ""
- # item 7: CUSTOM (0x80) disabled
- # bounds: x1=14 y1=47 x2=197 y2=193
- # data: ""
- # item 8: TEXT (0x08) enabled
- # bounds: x1=10 y1=8 x2=85 y2=25
- # text: "Extract to:"
-
-
- DITL_340.txt
- # 11 entries
- # item 0: BUTTON (0x04) enabled
- # bounds: x1=256 y1=148 x2=336 y2=166
- # text: "Load"
- # item 1: BUTTON (0x04) enabled
- # bounds: x1=1211 y1=0 x2=1229 y2=80
- # text: "Hidden"
- # item 2: BUTTON (0x04) enabled
- # bounds: x1=256 y1=173 x2=336 y2=191
- # text: "Cancel"
- # item 3: CUSTOM (0x80) disabled
- # bounds: x1=232 y1=49 x2=347 y2=69
- # data: ""
- # item 4: BUTTON (0x04) enabled
- # bounds: x1=256 y1=78 x2=336 y2=96
- # text: "Eject"
- # item 5: BUTTON (0x04) enabled
- # bounds: x1=256 y1=103 x2=336 y2=121
- # text: "Drive"
- # item 6: CUSTOM (0x00) enabled
- # bounds: x1=12 y1=49 x2=230 y2=195
- # data: ""
- # item 7: CUSTOM (0x00) enabled
- # bounds: x1=229 y1=49 x2=246 y2=195
- # data: ""
- # item 8: CUSTOM (0x80) disabled
- # bounds: x1=252 y1=134 x2=345 y2=135
- # data: ""
- # item 9: TEXT (0x88) disabled
- # bounds: x1=1172 y1=0 x2=1268 y2=101
- # text: ""
- # item 10: TEXT (0x08) enabled
- # bounds: x1=10 y1=6 x2=330 y2=23
- # text: "Please load segment #^0 of the archive."
-
-
-